序号
| 题目
| 期刊
| 发表时间
|
1
| 《基于阈值增量的动态眩光测量方法》
| 计量学报
| 2022.04
|
2
| 《基于阈值增量的标准动态眩光源设计方法》
| 计量学报
| 2022.03
|
3
| 《空气温度绝对探测激光雷达系统标定技术》
| 光学学报
| 2022.09
|
4
| 《热脱附气相色谱法测定氮中痕量二氧化硫》
| 分析试验室
| 2022.04
|
5
| 《环境温度对LED平均发光强度的影响》
| 光子学报
| 2022.09
|
6
| 《激光冷加工光谱检测技术研究》
| 光子学报
| 2023.03
|
7
| 《透射式能见度仪校准装置的研制及测量结果分析》
| 应用光学
| 2023.09
|
8
| 《Lateral scanning Raman scattering lidar for accurate measurement of atmospheric temperature and water vapor from ground to height of interest》
| Optics Letters
| 2023.05
|
9
| 《Investigation of the effective transmittance of Mach-Zehnder interferometer in the multi-longitudinal-mode high-spectral-resolution lidar》
| Optics and Laser in Engineering
| 2023.01
|
1
| 《基于阈值增量的动态眩光测量方法》
| 计量学报
| 2022.04
|
10
| 《Dam Deformation of High Precision GNSS Satellite Research on Calibration Method of Monitor》
| International Conference on Optical Communications and Networks
| 2021.10
|
11
| 《Research on Non-contact Calibration Method of Extensometer Calibrator Indication Error》
| International Conference on Optical Communications and Networks
| 2022.08
|
12
| 《Research on Infrasonic Wave Directional Simulation Techology Based on Phased Parametric Array》
| 计量学报
| 2022.04
|
13
| 《Algorithm for local nonlinear error calibration of displacement sensor based on C2 continuous interpolation》
| International Society for Optical Engineering
| 2022.12
|
14
| 《Miniaturized High Precision Time Interval Measurement Technology Basedon FPGA》
| International Conference on Electronic Measurement & Instruments
| 2023.08
|
15
| 《Performance analysis and evaluationof heat meter durability platformSystem》
| International Conference on Advanced Manufacturing Technology and Manufacturing Systems
| 2022.08
|
16
| 《可调谐激光吸收光谱气体水分传感器设计》
| 测控技术
| 2023.06
|
17
| 《危险品运输车辆安装的GNSS车载终端计量性能的校准方法》
| 上海计量测试
| 2022.06
|
18
| 《激光垂准仪重力准线校准方法》
| 上海计量测试
| 2022.11
|
19
| 《LED灯珠在白炽灯和LED标准灯两种光度量值传递体系下总光通量的研究》
| 中国照明电器
| 2023.07
|